Joolca Australia
Your Cart
0 items
Complete your kit
Search
We noticed you're from
HOTTAP Go
All-in-one hot shower kit.
$699.00 AUD
Meet HOTTAP Go
Adjustable Showerhead
The flow adjustor sits right on the showerhead, so you can dial the pressure up or down without touching anything else. It holds a consistent, comfortable flow even when turned right down. The hose runs 3m (10 ft), giving you enough reach to set up wherever you need.
Quick-connect gas hose
Connects to any standard small canister. A single 454g (1 lb) canister heats up to 91L (24 gal) of water to shower temperature, enough for roughly 15 showers. Pack two and you're covered for a full week out.
Reservoir
Holds enough water for two proper showers or one generous one. The built-in two-stage filter handles debris and fine particles, so it handles water from tanks, jerry cans, or a fresh creek. When you're done, everything stows inside the tank: hose, showerhead, gas hose, all of it. Close the lid and go.
Windproof venting
The vented casing directs airflow around the burner to keep it running in exposed conditions. Works on a clifftop, works on a beach, works in a paddock. Just works.
Digital display
Dial in your exact temperature on the digital display, up to 60°C (140°F). The 12V input runs off your vehicle's cigarette socket or any portable power station. Pair it with the Joolca Battery and you have a fully self-contained setup with no vehicle required.
Details you’ll love
The thinking that makes the outdoors great(er)
Hot water anywhere. See how it works.
Hot water anywhere. See how it works.
Specifications
-
Electrical
-
Power Draw
45 watt
-
Cigarette Socket Cable Length
5m (16.4 Feet)
-
Voltage
12V
-
-
Size & Weight
-
Water Volume
12L (3.2 gal) ~ 2 showers
-
Weight
9.5kg (20.9 lbs) (Without water)
-
Size
495 x 359 x 180mm (19.5 x 14.1 x 7.1 in) (H x W x D)
-
Gas Hose length
50cm (19.7 in)
-
Shower Hose Length
3m (9.8 ft)
-
Cigarette Socket Cable Length
5m (16.4 ft)
-
-
Propane
-
0.45kg (1 lb) gas usage
heats 90L (23.8 gal) of water or 15 showers.
-
Max Temperature
60°C (140°F)
-
Gas Hose length
50cm (19.7 in)
-
Gas Flow
20MJ/hr (18,956 BTU/hr)
-
-
Water & Flow
-
Water Volume
12L (3.2 gal) ~ 2 showers
-
Flow rate Max
3.5L (0.9 gal) per min
-
Flow rate Min
1.5L (0.4 gal) per min
-
FAQs
-
How Does it work?
HOTTAP Go is a fully self-contained hot water system with its own water tank and pump. Simply fill it up, set your desired temperature (up to 60°C), and press start.HOTTAP Go will recirculate the same water until it reaches your chosen temperature (around 5 minutes) - delivering every drop at perfect, consistent heat. Whether you’re showering, rinsing off gear, or washing up, it’s ready when you are. -
But a tankless option doesn't have any waiting time!
True - but off-grid, normally time isn't in short supply. In the time HOTTAP Go is heating up, you can get your towel, set up your gear, or round up the kids. Waters' what you need to worry about. And because of the short warm up period, you save every drop. -
How much water does it hold?
HOTTAP Go's 12L reservoir is perfectly sized for two great showers or one long, luxurious one.By pausing the water flow between rinsing and lathering, you can stretch it even further - thanks to HOTTAP Go's recirculation design. Every drop is pre-heated, so there’s no wasted water during startup, adjustments, or pauses. -
HOTTIES tank just isn't big enough for my family
HOTTAP Go's tank is built for two good showers or one great one. Need more? Refill (from any water source), press go, and it’s hot again before your next kid tracks down a towel. Oh, and it keeps the kids from emptying your entire water supply - miracle technology! -
What gas does it use?
HOTTAP Go runs on standard 1lb propane canisters. Each canister heats up to 24 gallons of water to shower temperature - that’s roughly 15 showers. The compact gas hose and canister conveniently store inside the HOTTAP Go reservoir when not in use. Prefer a larger setup? No problem. HOTTAP Go also works with 9kg gas tanks - you’ll just need a compatible hose and regulator to suit. -
How do I power the HOTTAP Go?
HOTTAP Go uses 12V power to run its electronics and built-in pump. Included is a cigarette-style power cable, perfect for plugging directly into your vehicle’s 12V socket.You can also power it with the Joolca Power Bank or any other suitable portable power source. -
Can I use water from wild sources like a river or lake?
Yes. HOTTAP Go features a two-stage filtration system - a removable debris filter for larger particles and a fine mesh filter that protects the internals for long-term reliability. -
How hot does the water get?
Up to 60°C. Even starting with icy water, HOTTAP Go will heat it right up to your chosen temperature.
YouTube reviews
Creators put it to the test — here’s what they say.
Complete Your Bathroom
Hot water's just the start. Add everything you need for a proper camp bathroom, wherever you are.
We've got you covered.
-
30 Day Trial
Open it. Set it up. Take it into the field. That's what the 30 days are for. If it's not for you, send it back and we'll refund you in full. -
Free Returns
Need to return something? Contact us, we'll send the label, and refund you in full once it's back. No restocking fees, no conditions. -
2 Year Warranty
We design and engineer our products ourselves, so we know what they're built for. If something fails within two years, we'll fix it or replace it. Simple as that.